Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an Energy mapping.In this thesis an Energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The building and plant sectors represent a large part of Sweden?s energy use. Putting energy requirements in public procurement as a tool for reducing energy consumption in the building and plant sectors is therefor an opportunity that operators can take advantage of. The aim of this thesis was to map the energy requirements in procurement that operators in the public sector use today in building and plant projects. The analysis was made with respect to if the energy requirements corresponded to the parts with large energy use in building and plant projects and also in which way energy requirements in procurement are written in the contract.

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

Denna rapport jämför tre stycken texturmappningsalgoritmer vars uppgift är att öka detaljrikedomen på ytor utan att tillföra några extra polygoner. Algoritmerna är tre stycken pixel-shaders vars uppgift är att skapa illusionen av tre dimensioner istället för två på de ytor algoritmerna är applicerad på. Ytor med få polygoner ska se ut att bestå utav många fler.Fyra expriment har utförts på tre, till formen mycket olika, 3D-modeller tillsammans med tre olika texturuppsättningar berstående utav färg-, normal- och höjdtextur.Resultatet visar att alla tre tekniker har olika starka och svaga sidor och på så vis sina optimala användningsområden..

With new energy directives in place, the Swedish Social Service (SSS) stands beforethe challenge how to reduce the energy demand in its locales. It is a complex matter,as the locales are rented from various property owners and it becomes a question ofhow to reduce the operational electricity and influence the property owners to workmore with energy efficiency. This thesis takes a balanced research approach in threeparts. Firstly a qualitative part in form of interviews with personnel at the SSS and itsproperty owners, secondly a quantitative part of descriptive nature in form of energystatistics and thirdly a literature review of Energy Management (EM) Supply ChainManagement(SCM), Green Supply Chain Management(GSCM) and EnviromentalPerformance Indicators (EPI). This in order to be able to give normativerecommendations of how the SSS should act to reduce its energy consumption in itslocales and provide new insights on how EM, SCM, GSCM and EPI can be applied ineffect.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

Kontext: Displacement Mapping är en teknik som används inom 3D-spel för att skapa detaljrikedom i geometri utan att behöva triangelobjekt bestående av oönskad geometrikomplexitet. Tekniken har även andra användningsområden i 3D-spel, till exempel terränggeometri. Tekniken skänker detaljrikedom genom att i samband med tesselering förskjuta geometri i en normalriktning eller längs annan specificerad riktning. Vector Displacement Mapping är en teknik liknande Displacement Mapping där skillnaden är att Vector Displacement Mapping förskjuter geometri i tre dimensioner. Mål: Syftet med arbetet är utforska Vector Displacement Mapping i sammanhanget 3D-Spel och att antyda att tekniken kan användas i 3D-spel likt Displacement Mapping.

The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

Kontext: Displacement Mapping är en teknik som används inom 3D-spel för att skapa detaljrikedom i geometri utan att behöva triangelobjekt bestående av oönskad geometrikomplexitet. Tekniken har även andra användningsområden i 3D-spel, till exempel terränggeometri. Tekniken skänker detaljrikedom genom att i samband med tesselering förskjuta geometri i en normalriktning eller längs annan specificerad riktning. Vector Displacement Mapping är en teknik liknande Displacement Mapping där skillnaden är att Vector Displacement Mapping förskjuter geometri i tre dimensioner. Mål: Syftet med arbetet är utforska Vector Displacement Mapping i sammanhanget 3D-Spel och att antyda att tekniken kan användas i 3D-spel likt Displacement Mapping. Arbetet jämför Vector Displacement Mapping med Displacement Mapping för att urskilja skillnader i exekveringstid mellan teknikernas centrala skillnader.

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.

Energy awareness is growing among the Swedish population and a one­?to­?two-family dwelling can save energy. The purpose of this paper is to design a tool that helps these home owners reduce their energy costs.The paper develops a model that gives them an indication of how much energy they can save. For the majority of homeowners, the next step in the quest to reduce theirs is most likely an energy audit. Therefore, information to help home owners to get a good energy audit performed is included in the model.A prototype running the operating system iOS is created and validated against existing models, as well as an energy audit. .

To build a sustainable future should we first understand that; every aspect of our daily lives can affect the environment. It?s important that we take responsibility for understanding how we impact the environment and change our actions accordingly. The worlds total energy consumption equivalent to 80 million MWh / year. This corresponds to about 220 million MWh / day.Energy consumption is one of the main reasons for increased greenhouse gases when the reduction of this consumption has a great demand worldwide.In order to prevent the energy that consumed the buildings must be energy efficient but there is a conflict between radon ventilation and energy conservation in a building, given that ventilation can consume as much energy (currently 29-59% of energy-efficient houses use), especially in a cold climate as in Norway.

The purpose of this study was to implement an energy analysis and environmental evaluation of the property Hemsta 12:16 in Gävle. Based on two different methods, Energy Balance calculation and Environmental Building, the result of the property's energy use, energy performance and environmental impacts are presented. Except that, measures to reduce final energy consumption are presented.      The proposed measures can reduce energy usage by 100 400 kWh / year, which represents a decrease of 18% of the present energy usage. This would represent a total savings of 63 000 SEK per year. In addition, the environmental performance is improved by adopting the suggested measures..